RCA VR613HF - Manual (Page 24)

22
Using the Playback Features
Zero Search
The zero search feature lets you quickly return to a counter reading of 0:00:00
from anywhere on a tape. This is especially convenient when you want to
watch a segment of the tape several times.
1. Insert the prerecorded tape.
2. Press DISP twice to display only the time counter on the TV screen.
3. Press PLAY•PAUSE, FWD on the VCR or FF on the remote, or
REW to locate the place on the tape where you want to return
quickly.
4. Press CLEAR to reset the time counter to 0:00:00.
5. Continue playing the tape.
6. Press STOP .
7. Press SEARCH twice in the stop mode to display the ZERO
SEARCH menu on the TV screen. The current time counter
appears.
8. Press REW or FWD on the VCR, or FF on the remote to return to
0:00:00 . The time counter remains in the upper right corner of the
TV screen during search.
Blank Search
The VCR searches for blank portions of the tape that are more than six seconds
long.
1. Insert the prerecorded tape. Press STOP.
2. Press SEARCH three times to display the BLANK SEARCH menu.
3. Press FWD on the VCR or FF on the remote to begin searching for
six seconds of blank tape. A message appears on the screen if a
blank area is not found.
4. Press STOP to stop BLANK searching .
Playing a Tape
ZERO SEARCH
CURRENT TAPE COUNTER IS
2:17:25
PRESS REW TO GO TO 0:00
PRESS SEARCH TO EXIT
ZERO SEARCH
CURRENT TAPE COUNTER IS
-2:17:25
PRESS FF TO GO TO 0:00
PRESS SEARCH TO EXIT
BLANK SEARCH
SEARCH FOR BLANK AREA
PRESS FF TO BEGIN
PRESS SEARCH TO EXIT
PAUSE
SEARCH
SLOW•F.ADV
REC
STOP
POWER
FF
REW
PLAY
TV
CABLE
VCR
1
2
3
5
4
6 7
9
8
0
MENU
PREV CH CLEAR
TRACKING
SPEED
INPUT
CHAN
VOL
MUTE
DISP
TV•VCR