RCA VR613HF - Manual (Page 11)

9
5. Place channels in the VCR’s memory.
The first time you turn on the VCR or after a power
interruption, the VCR displays a message on the TV screen
prompting you to
AUTO CHANNEL SEARCH . If the
message does not appear, go to step A below. If the message
appears, follow the directions on the screen.
Wait until the channel numbers stop changing. This takes
about one to two minutes. The TV tunes to the lowest
channel found. Then, pressing
CHAN up or down selects only
the active channels.
If you ever need to manually SETUP CHANNELS on the
VCR because you change cable or antenna signals:
A . Press MENU to display the VCR MAIN MENU . If this
menu does not appear:
• Make sure the TV is tuned to same channel as the
3CH.4 switch on the VCR or the TV’s video input
(refer to TV’s manual).
• Press VCR , then press MENU again.
• If you use a basic hookup, check the VCR indicator in
display panel — it should be on. Press TV•VCR to
turn it on.
• Check the connections.
B . Press 3 to display the CHANNELS menu.
C . Press 1 to begin AUTO CHANNEL SEARCH .
The VCR automatically selects CABLE (cable TV) or
ANTENNA . If you need to change the setting manually,
press 3 .
6. Add or remove channels from the VCR’s memory.
You may want to add or remove channels if some of the
channels are not active, have weak signals, or you do not
want to watch them.
You must place channels in memory using the AUTO
CHANNEL SEARCH feature described above before you can
add or remove channels.
A . Press VCR .
B . Press MENU on the remote to display the VCR MAIN
MENU .
C . Press 3 to display the CHANNELS menu.
D . Press 2 to display the ADD/REMOVE CHANNEL menu.
E . Follow the directions on the screen.
F. Add or remove more channels using the CHAN up and
down buttons.
Setting Up the VCR
Startup
VCR MAIN MENU
1 TIMER RECORDINGS
2 SET CLOCK
3 CHANNELS
AUTO CHANNEL SEARCH
CONNECT ANTENNA CABLE...
THEN PRESS CH UP
CHANNELS
1 AUTO CHANNEL SEARCH
2 ADD/REMOVE CHANNELS
3 SIGNAL TYPE: CABLE
0 EXIT
VCR MAIN MENU
1 TIMER RECORDINGS
2 SET CLOCK
3 CHANNELS
CHANNELS
1 AUTO CHANNEL SEARCH
2 ADD/REMOVE CHANNELS
ADD/REMOVE CHANNEL
CHANNEL 03
IS PRESENTLY ADDED
PRESS CLEAR TO REMOVE
PRESS MENU TO EXIT