RCA VR613HF - Manual (Page 14)

12
Using the Remote Control
Buttons
TV CABLE
1 2 3
5 4 6
7 9 8
0
MENU
PREV CH
PAUSE
SEARCH SLOW•F.ADV
REC
STOP
CLEAR
POWER
TRACKING
FF REW
PLAY
SPEED
VCR
INPUT
CHAN
VOL MUTE
DISP TV•VCR
continued on next page
CABLE
Used with the POWER button to
turn on a compatible cable box.
See page 15.
TV
Turns on a compatible RCA,
ProScan or GE TV, and sets the
remote to control the TV.
Used with the POWER button to
turn on another brand of TV
when the remote is programmed
to control that TV. See page 14.
VCR
Sets the remote to control the
VCR.
Component Buttons
Press one of the buttons to set the remote to operate that component.
VCR Function Buttons
Press VCR to set remote to control the VCR to use the function buttons.
CHAN (Channel) Up or Down
Selects the next higher or lower
channel in the VCR’s channel
memory.
CLEAR
Resets the time counter to
0:00:00 .
Lets you change entries when
setting the clock or VCR for a
timer recording.
DISP (Display)
Shows VCR operating displays
on the TV screen.
Displays the time counter.
FF (Fast Forward)
Fast forwards the tape when the
VCR is stopped.
Quickly searches a tape in
forward motion during playback.
INPUT
Turns the line input ( L ) on or off.
Line input refers to the signal
coming from the component
connected to the audio/video
jacks on the back of the VCR.
MENU
Displays the VCR MAIN MENU
on the TV screen.
Removes a menu from the screen.
Numbers (0 through 9)
Selects a channel up to 99—press
two numbers.
Selects a cable channel over 99—
press and hold
1 until 1--
appears on the screen. Then,
press the other two numbers.
PAUSE
Pauses action for viewing during
playback.
Pauses recording to prevent
recording of unwanted scenes.
PLAY
Plays a tape.
POWER
Turns off the VCR when the
remote is set to control the VCR.