Ethernet network connection, Pre l iminar y – Runco 3DIMENSION D-73D User Manual
Page 61
D-73d Series Installation/Operation Manual
45
PRE
L
IMINAR
Y
Ethernet Network Connection: Use a standard, Category 5 network cable with an
RJ-45 plug to connect a network hub, router or gateway to the Ethernet port on the
Primary DHD Controller; see Figure 3-20.
For more information about configuring and using this connection, refer to Network on
page 88.
Figure 3-20. Ethernet Network Connection to Primary DHD Controller
H
HDMI 4
HDMI 3
HDMI Out
Audio Only
HDMI Out
To Display
Ethernet
PC / Control
RS232
Display Control
IR
H
H
HDMI 4
HDMI 3
HDMI Out
Audio Only
HDMI Out
To Display
PC / Control
RS232
Display Control
IR
1
8
to Ethernet
Hub, Router
or Gateway
1 Transmit Data +
2 Transmit Data -
3 Receive Data +
6 Receive Data -