beautypg.com

2 upnp™ on windows xp systems, Adding upnp, Upnp™ on windows xp systems – RCA SpeedTouch 536 User Manual

Page 99: Chapter 6

background image

Chapter 6

Troubleshooting

E-DOC-CTC-20050429-0099 v1.0

91

6.2 UPnP™ on Windows XP Systems

SpeedTouch™ not

detected by UPnP™ or

IGD Control Client

Check on following:

Make sure the UPnP™ and Internet Gateway Device Control Client Networking
components are added to your MS Windows XP system.

Your computer doesn’t support UPnP™ if you run an operating system other
than MS Windows XP and MS Windows Millennium.

Make sure that UPnP™ is not disabled in the SpeedTouch™ web page; see

“4.5.2 Game & Application Sharing” on page 57

.

Adding UPnP™

If you are running Microsoft Windows XP, it is recommended to add the UPnP™
component to your system.
Proceed as follows:

1

On the Start menu, click (Settings >) Control Panel.

2

The Control Panel window appears. Click Add or Remove Programs.

3

In the Add or Remove Programs window appears, click Add/Remove
Windows Components

.

4

In the Windows Components Wizard, select Networking Services in the
Components

list and click Details.

5

In the Networking Services window, select Universal Plug and Play or UPnP
User Interface

and click OK.

6

Click Next to start the installation and follow the instructions in the Windows
Components Wizard

.

7

At the end of the procedure the wizard prompts you that the installation was
successful. Click Finish to quit.