1 upgrade wizard on setup cd, Introduction, Starting the upgrade wizard – RCA SpeedTouch 536 User Manual
Page 92: Upgrade wizard on setup cd, Chapter 5
Chapter 5
Software Upgrade
E-DOC-CTC-20050429-0099 v1.0
84
5.1 Upgrade Wizard on Setup CD
Introduction
The procedures described in this section are valid only in case:
You run an MS Windows Operating System or Mac OS X.
Your SpeedTouch™ and computer are properly connected through Ethernet or
USB.
During the upgrade procedure in most cases configuration settings are backed up by
the wizard and restored after uploading the system software.
Starting the Upgrade
Wizard
To launch the SpeedTouch™ Upgrade Wizard:
1
Insert the Setup CD in your computer’s CD-ROM or DVD-ROM drive. The
SpeedTouch™ CD menu will pop up automatically.
2
Optionally, in the Choose Language window, select the language of your
choice and click OK.
3
The SpeedTouch™ safety instructions will be displayed in your default web
browser. Close the window.
4
Select I have read and I fully understand the Safety Instructions and
Regularity Information
and click Continue.
5
In the SpeedTouch™ CD Menu, click SpeedTouch Maintenance.
6
Click Upgrade My SpeedTouch, to start the SpeedTouch™ Upgrade Wizard.
7
See
“ Upgrade procedure” on page 85
to continue.
If not:
In MS Windows:
Click Run on the Start menu and enter the following path:
D:\Setup.exe
where D stands for the drive letter of your CD-ROM
or DVD-ROM drive.
On Mac OS X
Double-click the CD icon and then double-click Menu.