Runco DTV-1200 - Manual (Page 70)

SET TO MIDPOSITION
R&B CONVERGENCE MID
GREEN CONVERGENCE MID
FOCUS TO MIDPOSITION
E-W TO MIDPOSITION
N-S TO MIDPOSITION
DIG VERT LINEARITY MID
DIG HOR LINEARITY MID
ASTIGMATISM MIDPOSITION
ALL SETTINGS TO MIDPOS
Select with or
then
to return.
SET TO MIDPOSITION
R&B CONVERGENCE MID
GREEN CONVERGENCE MID
FOCUS TO MIDPOSITION
E-W TO MIDPOSITION
N-S TO MIDPOSITION
DIG VERT LINEARITY MID
UNDO DIG HOR LINEARITY MID
ASTIGMATISM MIDPOSITION
ALL SETTINGS TO MIDPOS
Select with or
then
to return.
SET TO MIDPOSITION
R&B CONVERGENCE MID
GREEN CONVERGENCE MID
FOCUS TO MIDPOSITION
E-W TO MIDPOSITION
N-S TO MIDPOSITION
DIG VERT LINEARITY MID
DIG HOR LINEARITY MID
ASTIGMATISM MIDPOSITION
ALL SETTINGS TO MIDPOS
Select with or
then
to return.
68
Digital Horizontal Linearity to Midposition
What can be done?
The digital horizontal linearity settings for the different areas can be set to their midposition.
How to set the Digital Horizontal Linearity to Midposition?
1. Push the cursor key or to highlight 'Dig Hor Linearity mid' (menu 1).
2. Press ENTER to select. A confirmation screen will be displayed first (menu 2).
3. Press ENTER to confirm. Press EXIT to cancel the procedure to set the Digital horizontal linearity to their
midposition.
menu 1
DIG HOR LINEARITY
TO MIDPOSITION
Dig Hor Linearity settings
in current block
will be overwritten!
to confirm
to cancel
!
menu 2
Undo Digital Horizontal Linearity to Midposition
What can be done?
'Undo digital horizontal linearity to midposition' is displayed in the Set
Midposition menu instead of 'Dig Hor Linearity to midposition' when the latter
is pressed. The settings for the dig hor linearity can be returned to previous
installed settings as long the projector is playing on the same source ( = same
adjustment block).
How to undo the digital horizontal linearity to midposition?
1. Push the cursor key or to highlight 'Undo Dig Vert Linearity to
midposition' (menu 1).
2. Press ENTER undo. menu 1
Astigmatism to Midposition
What can be done?
The astigmatism settings for the different areas can be set to their midposition.
How to set the Astigmatism to Midposition?
1. Push the cursor key or to highlight 'Astigmatism' (menu 1).
2. Press ENTER to select. A confirmation screen will be displayed first (menu 2).
3. Press ENTER to confirm. Press EXIT to cancel the procedure to set the Astigmatism to their midposition.
menu 1
ASTIGMATISM
TO MIDPOSITION
Astigmatism settings
in current block
will be overwritten!
to confirm
to cancel
!
menu 2