Copy a block – Runco DTV-1200 User Manual
Page 63
SERVICE MODE
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
Select with or
then
61
What can be done?
Within the memory management menu, the following items can be consultated or executed :
- copy a block
- delete a block
- delete all blocks
- set to midposition
How to select?
To select Memory Management:
1. Push the cursor key or to highlight Memory Management (menu 1).
2. Press ENTER to select. The memory management menu will be displayed (menu 2).
Memory Management
menu 1
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
SET TO MIDPOSITION
Select with or
then
menu 2
Copy a Block
What can be done?
The copy a block function copies the settings of a selected block into the active block.
How to copy?
To copy a block :
1. Push the cursor key or o highlight 'Copy a Block' (menu 1).
2. Press ENTER to select.
The copy menu will be displayed (menu 2).
To copy the settings of a closed block to the block you are working on (active block),
3. Push the cursor key or to select a block.
4. Press ENTER to copy the selected block.
All current settings will be overwritten with the settings of the block which is copied.
A confirmation screen will be displayed (menu 3).
5. ENTER to confirm. EXIT cancels the copy procedure and returns without copying the block.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
SET TO MIDPOSITION
Select with or
then
menu 1
CHANGE PASSWORD
Password will be
reprogrammed as xxxx
!
menu 3
COPY MODE
Nr.
Src
Fh
Fv
inp
conf
1
1
15.6
50
video
FC
2
3
31.2
60
RGB3S
RT
3
-
15.6
50
intern
FC
4
2
31.5
50
RGB3S
FC
5
-
33.7
60
intern
FC
6
7
8
Active block nr. 1
Select with or
menu 2