Runco DTV-1200 - Manual (Page 37)

COLOR BALANCE
FIXED COLOR BALANCE
3200 4900 6500 9300
CUSTOM RED & BLUE GAIN
CUSTOM GREEN GAIN
CUSTOM RED & BLUE CUT OFF
CUSTOM GREEN CUT OFF
Select with arrow keys
the
Red & Blue:
adjust Red with or
Blue with or
to return
35
Color Balance
What can be done?
The Color Balance function is used to select or adjust the color temperature of white used by the projector.
The Color Balance can be adjusted on two different ways :
- fixed color balance. You have the choice between 3200 K (reddish), 4900 K, 6500 K (white) or 9300 K
(bluish).
- Custom white and black balance.
How to select the Color Balance?
1 Push the cursor keys or to highlight 'Color Balance' (menu 1).
2 Press ENTER to select.
The color balance menu will be displayed (menu 2).
PICTURE TUNING
PICTURE TUNING
COLOR BALANCE
SYNC: FAST
PEAKING
CLAMP TUNING
Select with or
then
to return
menu 1
menu 2
Fixed Color Balance
To select a fixed color balance, perform the following:
1. Highlight one of the 4 preprogrammed color temperatures with the cursor keys and
2. press ENTER to display the image with the desired color balance.
Custom Color Balance
The custom color balance adjustment can be divided in two parts, the 'gain' adjustment and the 'cut off' adjust-
ment.
Gain adjustment (affects the brightest areas of the image)
1. Push the cursor key or to select 'Custom Red & Blue gain' (menu 1).
2. Press ENTER to activate the adjustment.
3. Push the cursor key or to adjust the red gain
4. Push the cursor key or to adjust the blue gain. A bar scale indicates the amount of adjustment.
5. Press ENTER to return to the Color Balance menu.
6. Push the cursor key or to select 'Custom Green Gain' (menu 2).
7. Press ENTER to activate the adjustment.
8. Push the cursor key or to adjust the green gain.
9. Press ENTER to return to the Color Balance menu.