Runco DTV-1200 - Manual (Page 22)

20
Picture Controls
The control keys are located on the right side of the key panel of the Remote and indicated with the name of the
control and an icon.
When an image control is pressed, a text box with bar scale and the function name of the control, e.g. 'bright-
ness...' appears on the screen (only if text is ON). The length of the bar scale indicates the current memorized
setting for this source. The bar scale changes as the + or - side of the button of the control are pressed.
Brightness Control:
A correct 'brightness' setting is important for good image reproduction. Adjust the brightness with the + button
and - button until the darkest parts of the picture appear black.
A bar scale gives a visual indication on the screen of the current brightness setting while pressing on the above
indicated buttons. If the bar scale is not visible on the screen, press 'TEXT' once and retry the above indicated
buttons.
The bar scale increases when pressing on the + button (higher brightness) and decreases when pressing on the
- button (lower brightness).
Contrast Control:
A correct 'contrast' setting is important for good image reproduction.
Adjust the contrast to the level you prefer, according to room lighting conditions.
A bar scale gives a visual indication on the screen of the current contrast setting while pressing the + or - but-
tons . If the bar scale is not visible on the screen, press 'TEXT' key once and retry the above indicated buttons.
The bar scale increases when pressing on the + button (higher contrast) and decreases when pressing on the -
button (lower contrast).
Color Saturation Control: Not used on the DTV-1200
Tint Control: Not used on the DTV-1200
Sharpness Control: Not used on the DTV-1200
Sound Controls: Not used on the DTV-1200
The Pause Key
The ‘Pause’ button mutes the projected image. When Pause is pressed, the image will disappear until it is
pressed again.
The Freeze Key
When the Freeze key is pressed, the image is frozen until this key is pressed again.