Raypak D-2 POWER VENT 206A - Manual (Page 4)

4
INSTALLATION REQUIREMENTS
Failure to install, maintain and/or operate the Power Vent in accordance with manufacturerʼs instructions
may result in conditions which can produce bodily injury and property damage.
The equipment must be installed by a qualified installer in accordance with all local codes, or, in the
absence of local codes, with the latest edition of the National Fuel Gas Code, ANSI Z223.1/NFPA 54 and the
National Electrical Code, ANSI/NFPA 70. In Canada, installations must conform to CAN/CSA B149.1 and to the
latest Canadian Electrical Code Part 1.
Disconnect power supply when making wiring connections or when working around the fan blade and
motor. Failure to do so may result in severe personal injury and equipment damage.
Make certain the power source is adequate for the fan motor requirements. Do not add the Power Vent
to a circuit where the total load is unknown.
DIMENSIONS
13.59
18.13
7.91
1.88
4.38
DIMENSIONAL DATA
Model A B
206/207
266/267
12.31 4.31
336/337
406/407
18.31 7.31