Radio Shack TAD-1029 - Manual (Page 19)

19
USING PAGE/INTERCOM
You can use the TAD-1029 as a pager
and a two-way intercom between the
base and the handset. This is useful if
you want to find the handset, or if you
want to have a conversation between
someone with the handset and some-
one at the base.
To page the person with the handset or
to find the handset, press
PAGE on the
base. The handset beeps three times. If
you want the handset to beep for a long-
er time, you can hold down
PAGE for 3
seconds to have the handset beep for
about 35 seconds.
To stop the handset from beeping be-
fore it automatically stops, press
TALK
twice or press PAGE .
To answer a page from the base, press
INTCM on the handset. The TALK indica-
tor on the handset flashes and the IN-
TCOM indicator on the base lights.
Begin your conversation.
Notes:
• Paging does not work during a call.
• You cannot speak and hear the oth-
er party at the same time during an
intercom conversation.
• If a phone call comes in during an
intercom conversation, press TALK
on the handset to answer the call.
After you hang up, press
INTCM to
resume the intercom conversation.
To end the intercom conversation, press
INTCM on the handset or PAGE on the
base
MEMORY DIALING
You can store up to 9 numbers in memo-
ry, then dial a stored number by pressing
a one-digit memory location number.
Each stored number can be up to 16
digits long, including tone and pause en-
tries.
Storing a Number in Memory
1. Press MEM . The TALK indicator
flashes.
2. Enter the number and any tone or
pause entries (see “Using Tone Ser-
vices on a Pulse Line” on Page 18
and “Entering a Pause” on
Page 20).
43-789.fm Page 19 Monday, August 16, 1999 8:32 AM