Radio Shack TAD-1029 - Manual (Page 12)

12
INSTALLING BACKUP
BATTERIES
The TAD-1029 requires AC power to op-
erate. However, if AC power fails or you
unplug the TAD-1029, four AAA backup
batteries (not supplied) save the mes-
sages, day and time settings, and re-
mote operation security code for up to
12 hours. We recommend you use alka-
line batteries, such as RadioShack Cat.
No. 23-555.
Cautions:
• Use only fresh batteries of the re-
quired size and recommended type.
• Do not mix old and new batteries,
different types of batteries (stan-
dard, alkaline, or rechargeable), or
rechargeable batteries of different
capacities.
• To avoid losing information stored in
memory, do not unplug the AC
adapter when you replace the back-
up batteries.
Follow these steps to install backup bat-
teries.
1. Press in the tab on the battery com-
partment cover on the top of the
base and lift off the cover.
2. Put the batteries in the compartment
as indicated by the polarity symbols
(+ and –) marked inside.
3. Replace the cover.
Replace the batteries when the BATT
LOW indicator flashes.
Cautions:
• Always remove old or weak batter-
ies. Batteries can leak chemicals
that can destroy electronic parts.
• Dispose of old batteries promptly
and properly. Do not burn or bury
them.
INSTALLING THE
HANDSET’S ANTENNA
Screw the antenna
into the hole at the top
of the handset.
BATT LOW
43-789.fm Page 12 Monday, August 16, 1999 8:32 AM