Radio Shack TAD-1029 - Manual (Page 18)

18
USING REDIAL
You can quickly redial the last number di-
aled. Simply lift the handset and press
TALK . When you hear the dial tone,
press REDIAL.
Notes:
• The TAD’s redial memory stores
up to 32 digits, so you can redial
long-distance as well as local
numbers.
• The redial memory stores pause en-
tries (see “Entering a Pause” on
Page 20).
• The redial memory does not store a
flash entry or any digits entered af-
ter you press
FLASH (see “Using
Flash”).
USING FLASH
FLASH performs the electronic equiva-
lent of a switchhook operation for special
services, such as Call Waiting.
For example, if you have Call Waiting,
press
FLASH to answer an incoming call
without disconnecting the current call.
Press
FLASH again to return to the first
call.
Note: If you do not have any special
phone services, pressing
FLASH might
disconnect the current call.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-by-
phone, require tone signals. If you have
pulse service, you can still use these
special tone services by following these
steps.
1. Be sure T/P is set to P .
2. Lift the handset and press TALK .
3. Dial the service’s main number.
4. When the service answers, press .
Any additional numbers you dial are
sent as tone signals.
5. After you complete the call, return
the handset to the base or press
TALK . The phone automatically re-
sets to pulse dialing.
43-789.fm Page 18 Monday, August 16, 1999 8:32 AM