Ricoh 3232 - Manual (Page 93)

Error Messages and Their Meanings
85
5
Error Messages and Their Meanings
If there is an error, one of the following messages may appear on the display. If
other message appears, follow the message.
Message Causes and solutions
You do not have the privileges
to use this function.
Use of this function is restricted. Ask the ad-
ministrator.
Authentication has failed. Wrong login user name or password. Confirm
correct login user name or password.
Authentication is not possible from this ma-
chine. Ask the administrator.
The specified group contains
some destination(s) that do not
have access privileges. Do you
want to select only the privi-
leged destination(s)?
The group you have selected contains the des-
tinations that you have no permission to ac-
cess. Select only the destinations that you are
permitted to access.
Put original back, check it and
press [Start].
Original jammed during Memory Transmis-
sion. Place originals that have not been
scanned again.
Error occurred, and transmis-
sion was cancelled.
A document jam occurred during Immediate
Transmission. Press [OK], and then resend the
pages that have not been sent.
An error occurred during Immediate Trans-
mission. Press [OK], and then resend the origi-
nal.
Note
❒ There may be a problem with the machine
or the telephone line (for example noise or
cross talk). If the error reoccurs frequently,
contact your service representative.
Cannot detect original size.
Place original again, then
press [Start].
The machine failed to detect the size of the
original. Place originals again, and then press
the
{{{{Start}}}} key.
L
Call Service
Functional problems with fac-
simile. Please call service.
There is a problem with the fax. Record the
code number shown in the display and contact
your service representative. The copy function
will still work normally.
Memory is full. Cannot scan
more. Transmitting only scanned
pages.
If you press [Exit], the machine returns to
standby mode and starts transmitting the pag-
es that have been stored.
Following output tray is full.
Remove paper.
The paper output tray is full. Remove paper
from the tray indicated in the display.
ThemisC1_Fax_GB-F_FM.book Page 85 Wednesday, November 24, 2004 7:09 PM