Ricoh 3232 - Manual (Page 23)

Transmission Modes
15
2
Transmission Modes
There are two types of transmission:
• Memory Transmission
• Immediate Transmission
❖ ❖ ❖ ❖ Memory Transmission
Transmission starts automatically
after the original has been stored in
memory. It is a convenient method
for when you are in a hurry and
want to take the document away
with you. You can also send the
same original to several destina-
tions. See p.19 “Broadcasting Se-
quence”.
❖ ❖ ❖ ❖ Immediate Transmission
Immediately dials the destination
number, and while reading the
original, sends it. It is very conven-
ient when you want to send an
original quickly or when you want
to check the destination you are
sending to. When using this type
of transmission, the original is not
stored in memory. You can only
specify one address.
Switching between Memory
Transmission and Immediate
Transmission
Check the display to see which mode
is currently active. You can change
transmissio n m od e by pressin g
[Immed. TX]
or [Memory TX].
Note
❒ You can select the transmission
mode that is operative when the
machine is turned on or mode are
cleared , with [Memory / Immed.
Transmission Switch]
under Gen.
Settings/Adjust. See p.143 “Gener-
al Settings/Adjustment”, Facsimile
Reference .
ThemisC1_Fax_GB-F_FM.book Page 15 Wednesday, November 24, 2004 7:09 PM