Ricoh 3232 - Manual (Page 89)

81
5. Troubleshooting
Adjusting the Volume
You can change the volume of the fol-
lowing sounds that the machine
makes.
❖ ❖ ❖ ❖ On Hook Mode
Heard when the
{{{{On Hook Dial}}}} key
is pressed.
❖ ❖ ❖ ❖ At Transmission
Heard when the machine sends a
message.
❖ ❖ ❖ ❖ At Reception
Heard when the machine receives
a message.
❖ ❖ ❖ ❖ At Dialing
Heard after pressing the
{{{{Start}}}}
key, until the line connects to the
destination.
❖ ❖ ❖ ❖ At Printing
Heard when a received message is
printed. See p.95 “Print Comple-
tion Beep”, Facsimile Reference vanced Features> .
Note
❒ You can adjust the On Hook vol-
ume when you press the {{{{On Hook
Dial
}}}} key. See p.56 “On Hook Dial”,
Facsimile Reference tures> .
AAAA
Press the
{{{{User Tools/Counter}}}} key.
BBBB
Press [Facsimile Features].
CCCC
Make sure the [Gen. Settings/ Ad-
just]
screen is displayed.
DDDD
Press [Adjust Sound Volume].
EEEE
Press [Lower] or [Louder] for each
item, and then press [OK].
Note
❒ You can hear the actual volume
by pressing [Check].
❒ If you press [Cancel], the volume
setting is canceled. The display
returns to that of step
D .
ThemisC1_Fax_GB-F_FM.book Page 81 Wednesday, November 24, 2004 7:09 PM