Ricoh R1v - Manual (Page 111)

110
Displaying a Setting Change Warning
(SHTG STGS WARNG.)
You can set the icon of a changed function blink or a warning
message indicating a change will be displayed at power-on for about
5 seconds if the initial settings are changed for the following
functions.
• White Balance
• Focus
• ISO Setting
• Exposure Comp.
• Time Exposure
If you operate a camera button, the icon is changed from blinking to
steady.
If you operate a camera button during warning message display, the
message disappears.
To set whether to enable (ON) or disable (OFF) the shooting setting
alert, follow the steps below.
1.
Display the setup menu.
For detailed operation, see P.95.
2.
Press the
" " " " button to select
[SHTG STGS WARNG.] and press
the
O O O O or $ $ $ $ button.
3.
Press the
!" !" !" !" buttons to select
the desired setting.
4.
Press the
O O O O or # # # # button.
5.
If you pressed the
# # # # button in
step 4, press also the
M M M M button.
This setting will be used until you change it.
Possible Settings
OFF
OFF (Default)