Changing the beep sound setting (beep sound) – Ricoh R1v User Manual
Page 101
100
Changing the Beep Sound Setting
(BEEP SOUND)
During operation, the camera generates four types of sounds: start
sound, shutter release sound, focus sound, and beep sound.
You can change the setting to mute these operation sounds.
To change the setting of operation sound, follow the steps below.
1.
Display the setup menu.
For detailed operation, see P.95.
2.
Press the
!"
!"
!"
!" button to select
[BEEP SOUND] and press the
O
O
O
O
or
$
$
$
$ button.
3.
Press the
!"
!"
!"
!" buttons to select
the desired setting.
4.
Press the
O
O
O
O or #
#
#
# button.
5.
If you pressed the
#
#
#
# button in step
4, press also the
M
M
M
M button.
This setting will be used until you change it.
Start sound
: Sound when the camera power is turned on.
Shutter release sound
: Sound when the shutter button is pressed.
Focus sound
: When the focus is set, the camera generates the focus sound.
Beep Sound
: If an impossible operation is attempted, the camera generates the beep
sound.
Possible Settings
Shutter release sound (Shutter release sound, Beep Sound)
ON (all sounds on) *Initial setting at purchase
OFF (all sounds off)