Ricoh Type 3260 User Manual

Page 45

Using as the Windows Network Printer

GGGG

Select the [Printer Name] check box to select the printer models you want to
use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.

HHHH

Double-click the printer name to display the printer settings.
The details shown in [Comment:], [Driver:], and [Port:] vary depending on the
operating system, printer model, and port.

IIII

Click [Port:], and then click [Add].

JJJJ

Click [Network Printer], and then click [OK].

KKKK

Double-click the computer name you want to use as a print server in the
[Browse for Printer]

window.

LLLL

Select the printer you want to use, and then click [OK].

MMMM

Check that the port of the selected printer is displayed in [Port:].

NNNN

Configure the user code as necessary.
For an RPCS printer driver, a user code can be set after the printer driver in-
stallation. For information about user code, see the printer driver Help.

OOOO

Select the [Default Printer] check box to configure the printer as default.

PPPP

Click [Finish].
The printer driver installation starts.

QQQQ

Click [Finish] in the installation completion dialog box.
A message about restarting the computer may appear. Restart the computer
to complete installation.

Reference

A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use [Add Printer]. See p.57 “If a
Message Appears during Installation”.

VenusC1GB-Printer-F8_FM.book Page 39 Tuesday, March 29, 2005 4:51 PM