Setting ohp transparencies – Ricoh Type 3260 User Manual

Page 24

Getting Started

Setting OHP transparencies

Note

❒ For colour printing, do not use

OHP transparencies that have eas-
ily melted surface.

❒ Insert OHP transparencies in the

K direction.

❒ We recommend that you use a

4000ANSI lumen or brighter over-
head projector to project OHP
transparencies.

❒ Paper settings can also be set using

the printer driver. The following
procedures are not necessary
when setting paper sizes using the
printer driver.

❒ Paper size settings set using the

printer driver have priority over
those set using the machine's dis-
play panel.

❒ When the printer driver is not

used, make settings using the dis-
play panel.

Reference

For printer driver settings, see the
printer driver Help.

AAAA

Press the

{{{{User Tools/Counter}}}} key

on the control panel.

BBBB

Press [System Settings].

CCCC

Press the [Tray Paper Settings] tab.

DDDD

Press [

TNext] to scroll through the

list.

EEEE

Press [Paper Type: Bypass Tray].

FFFF

Select [OHP] or [Translucent].

GGGG

Press [OK].
The paper type selected is dis-
played.

HHHH

Press the

{{{{User Tools/Counter}}}} key.

Note

❒ The settings made will remain

valid until they are reset again.
After printing on OHP trans-
parencies or thick paper, make
sure to clear settings for the next
user.

VenusC1GB-Printer-F8_FM.book Page 18 Tuesday, March 29, 2005 4:51 PM