Ricoh Type 3260 - Manual (Page 23)

Setting Paper on the Bypass Tray
17
1
Setting thick paper
Note
❒ Paper settings can also be set using
the printer driver. The following
procedures are not necessary
when setting paper sizes using the
printer driver.
❒ Paper size settings set using the
printer driver have priority over
those set using the machine's dis-
play panel.
❒ When the printer driver is not
used, make settings using the dis-
play panel.
Reference
For printer driver settings, see the
printer driver Help.
AAAA
Press the
{{{{User Tools/Counter}}}} key
on the control panel.
BBBB
Press [System Settings].
CCCC
Press the [Tray Paper Settings] tab.
DDDD
Press [
T T T TNext] to scroll through the
list.
EEEE
Press [Paper Thickness Setting].
FFFF
Select [Thick1] or [Thick2].
GGGG
Press [OK].
HHHH
Press the {{{{User Tools/Counter}}}} key.
Note
❒ The settings made will remain
valid until they are reset again.
After printing on thick paper,
make sure to clear settings for
the next user.
VenusC1GB-Printer-F8_FM.book Page 17 Tuesday, March 29, 2005 4:51 PM