Ricoh Fax 2210L - Manual (Page 37)

G ETTING S TARTED 1.23
1
Installing Software in windows
N OTES :
• Cancel the “New Hardware Found” window when your
computer boots up.
• Make sure that your machine is turned on and connected to your
computer’s parallel port or USB port before installing
software. Windows 95 and Windows NT 4.0 do not support the
USB connection.
1 Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run and an maintenance
window appears.
If the maintenance window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “X” with the
letter of your drive and click OK.
N OTES : If your machine is not connected to the computer, the
following window will appear.
• After connecting the machine, click Next.
• If you want to skip the connection status, click Next, and No to
the following screen. Then the installation will start and the test
page will not be printed at the end of the installation.