Things to consider before you connect, Protect against power surges, Protect components from overheating – RCA RD900W User Manual
Page 5: Connection pictures, Chapter 1: connections and setup
Chapter 1
3
Chapter 1: Connections and Setup
Illustrations contained in this document are for representation only.
Things to Consider Before You Connect
Protect Against Power Surges
•
Connect all components before you plug any of their power cords into the wall outlet.
•
Turn off all components before you connect or disconnect any cables.
Protect Components from Overheating
•
Don’t block ventilation holes on any of the components. Arrange the components so that air can
circulate freely.
•
Don’t stack components.
•
When you place components in a stand, make sure you allow adequate ventilation.
•
If you connect an audio receiver or amplifier, place it on the top shelf so the heated air from it
won’t flow around other components.
Position Cables Properly to Avoid Audio Interference
•
Insert each cable firmly into the designated jack.