Roland V-Bass VB-99 - Manual (Page 155)

155
SYSTEM Chapter 8 Parameter Guide
Chapter 8
*1 You cannot set the MIN or MAX parameters when the TARGET
parameter is set to one of the functions below. The MIN
parameter is fixed at 0, and the MAX parameter is fixed at 127.
• SCRTCH SW
• BPM SYNC
• CLIP LOOP
• AB SW
• TAP SW
• DUAL STREAM
*2 The TRIGGR, TIME, and CURVE parameters are enabled when
the SOURCE parameter is set to INTRNL PEDAL.
*3 The RATE and FORM parameters are enabled when the
SOURCE parameter is set to WAVE PEDAL.
Although the target names indicated refer to EDIROL DV-7PR
and motion dive .tokyo, it is Control Change messages that are
actually transmitted.
For more on the correspondence between the target names and
Control Change numbers, refer to p. 161.
For more detailed information on the EDIROL DV-7PR and
motion dive .tokyo performance package, refer to the Owner’s
Manuals for each product.
STRING CH (String Channel)
Some V-LINK compatible equipments such as the EDIROL DV-
7PR allow use only of A CH.
MIDI CH (MIDI Channel)
• The V-LINK screen’s MIDI CH parameter is a system
parameter.
• When a V-LINK compatible device is connected to the VB-99,
set this parameter so that the V-LINK compatible device’s MIDI
channel and the MIDI channel used by the VB-99 are not the
same.
• The MIDI channels set here are output as System Exclusive
messages when the VB-99’s power is turned on and when the V-
LINK function is switched on.
• Some V-LINK compatible equipments such as the EDIROL DV-
7PR allow use only of MIDI A CH.
Parameter/
Range
Explanation
HiC, 1–4th, LowB
Selects the channel to be controlled with each string.
OFF No channel is controlled.
A CH Channel A of the V-LINK compatible device
is controlled.
B CH Channel B of the V-LINK compatible device
is controlled.
C CH MIDI Note plug-in is controlled.
V-LINK SYSTEM
Parameter/
Range
Explanation
This sets the MIDI receive channel for the V-LINK compatible device
connected to the VB-99.
MIDI A CH (MIDI A Channel)
1–16ch Sets the MIDI channel for Channel A of the
V-LINK compatible device.
MIDI B CH (MIDI B Channel)
1–16ch Sets the MIDI channel for Channel B of the
V-LINK compatible device.
MIDI C CH (MIDI B Channel)
1–16ch Specifies the MIDI channel that will control
MIDI note plug-in.
VB-99_e.book 155 ページ ２００８年８月１８日 月曜日 午後１時１０分