Renesas Single-Chip Microcomputer H8/36079 - Manual (Page 15)

Option Link Settings
Reference Function Fitted Alternative (Removed) Related To
R38 CPU reset signal Enables CPU reset signal Disables CPU reset signal, but it
can be enabled if jumper J7 set
Table 6-8: Reset configuration links
Table 6-9 below describes the function of the option links associated with Analog Voltage Source configuration. The default configuration
is indicated by BOLD text.
Option Link Settings
Reference Function Fitted Alternative (Removed) Related To
R42 Analog Voltage
Source
Analog Voltage Source from external
connector. (JA1 header pin 1)
Analog voltage source from on
board Vcc.
R43
R43 Analog Voltage
Source
Analog voltage source from on
board Vcc.
Analog Voltage Source from
external connector.
R42
Table 6-9: Analog Voltage Source configuration links
Table 6-10 below describes the function of the option links associated with External Subclock Oscillator configuration. The default
configuration is indicated by BOLD text.
Option Link Settings
Reference Function Fitted Alternative (Removed) Related To
R49 External
Subclock
Oscillator
Parallel resistor for crystal Not fitted
Table 6-10: External Subclock Oscillator configuration links
Table 6-11 below describes the function of the option links associated with Real Time Clock Oscillator Source configuration. The default
configuration is indicated by BOLD text.
Option Link Settings
Reference Function Fitted Alternative (Removed) Related To
R50 Real Time Clock
Oscillator
Source
External Clock Source Internal Clock Source R49, R52, R53
R52 Real Time Clock
Oscillator
Source
Internal Clock Source External Clock Source R49, R50, R53
R53 Real Time Clock
Oscillator
Source
External Clock Source Internal Clock Source R49, R50, R52
Table 6-11: Real Time Clock Oscillator Source configuration links
Table 6-12 below describes the function of the option links associated with Processor Oscillator Source configuration. The default
configuration is indicated by BOLD text.
11