Roland DP-1000 - Manual (Page 18)

17
Convenient Functions
Transposing without
Changing Your Fingering—
Key Transpose
You can play in a different key-without changing the keys
you are playing. This function is called “Key Transpose.”
When you are accompanying a singer, you can use Key
Transpose to match the vocal pitch of the singer, allowing
you to transpose easily while using the same printed music
(keyboard fingering).
Key transpositions remain in effect until the keyboard’s
power is turned off.
* The transposition setting is effective only on sounds performed
on the DP-1000’s keyboard. This setting is not effective on tones
from external MIDI messages played on the DP-1000.
Using the C Major Keys to Play
a Song in E Major
1. While holding down the [Key Touch/Demo
Song] button, press the tonic (root) of the
key to which you want to transpose.
Use the C2–B2 notes to select the tonic.
Refer to “Functions Assigned to the Keyboard” (p. 24).
Here, press the E2 key.
fig.5-01.e
2. To return to the previous condition, while
holding down the [Key Touch/Demo Song]
button, press the C2 key.
fig.5-02.e
Changing the Volume
Balance in Dual Play
You can change the volume balance between the two layered
sounds in Dual Play (p. 13).
When the Keyboard is turned on, the response is set to
“Standard.”
This setting remains in effect until the keyboard’s power is
turned off.
While holding down the [Key Touch/Demo
Song] button, press the corresponding
note (C7–E7).
fig.5-04.e
Key Description
C7 One of the two layered tones sounds louder.
C#7 One of the two layered tones sounds
somewhat louder.
D7 Standard
D#7 The other of the two layered tones sounds
somewhat louder.
E7 The other of the two layered tones sounds
louder.
Demo Song
Key Touch /
While holding down...
Press
E2
Demo Song
Key Touch /
While holding down...
Press
C2
Demo Song
Key Touch /
E7 C7
While holding down...
Press