Roland DP-1000 - Manual (Page 15)

14
Playing the Keyboard
2.
While holding down the [Piano] button, press the [Tone] button.
fig.4-05.e
Both button indicators are lit. When you play the keyboard, both the Piano and Strings
tones are layered.
Reverting to a Single Instrument Tone
Press either the [Piano] button or the [Tone] button.
Only the button indicator for the button that was pressed stays on, and only that
instrument sound is produced.
fig.4-06.e
Layering the Harpsichord and Strings Tones
You can perform with two tones assigned to the [Tone] button layered together (other
than the piano tone).
While holding down the [Tone] button, simultaneously press the
Harpsichord and Strings keys from among the keys marked as
“Tone” keys.
fig.4-07.e
Tones composed of two separate layered tones (“Dual” tones) cannot be assigned
to the [Tone] button. When the [Tone] button is pressed, the single previously
assigned tone is restored.
You can adjust the volume balance between the two selected tones in Dual Play.
Please refer to “Changing the Volume Balance in Dual Play” (p. 17).
Piano Tone
While holding down... Press
Piano Tone
Press Press
or
Tone
While holding down... Press simultaneously
NOTE