Rinnai DIRECT VENT FIREPLACE RHFE-750ETRA - Manual (Page 28)

28 Rinnai Corporation RHFE-750ETRA
Place the condensate tray on top of the lower panel
on the left side under the condensate tube.
Place it flat so that it matches up with the shape of the
lower panel. One edge of the tray has a short lip.
Position the tray so that this lip is towards the front of
the appliance.
Condensate Tray
Front of appliance Lower panel
Condensate tray
Lower panel
Condensate tray
Correct Incorrect
WARNING
Ensure that the lower slots are properly positioned
against the combustion chamber. The slot should be
between the tapered washer and the appliance; it
should not be between the tapered washer and the
spring.
Installing Glass Panel
Correct Incorrect
Final
Assembly
Ensure that the sealing material completely covers
the perimeter of the glass. Squeeze the sealing
material so that it is no longer flat. This will allow it
to flatten correctly when installed.