Roland HP 237R - Manual (Page 20)

20
Playing the Keyboard
Sounding the Metronome
You can start or stop the metronome with a single button.
In addition to adjusting the tempo and time, you can also change the sound and volume
of the metronome.
fig.5-09
1.
Press the Metronome [On/Off] button, and the metronome will begin
sounding.
fig.5-10.e
The Metronome [On/Off] button indicator will blink in red and green in time with the
currently selected time. It will blink in red on the downbeats, and in green on the
upbeats.
If the Metronome [Beat] slider is in the “0” position, the indicator will blink in green.
2.
When you press the Metronome [On/Off] button once again to make
the indicator go dark, the metronome will stop sounding.
fig.5-11.e
■ Adjusting the Metronome Volume
The metronome volume can be adjusted in 8 levels.
The metronome volume is set to “4” when the keyboard is turned on.
While holding down the Metronome [On/Off] button, also press any
Tone button.
fig.5-12.e
Volume Max Min Reverb Chorus Strings Piano 1 Piano 2 chord
Harpsi-
phone Organ
Vibra- Pipe
Piano 1
Electric
Piano 2
Electric
120 168
Tempo Beat
208 40 60 80 96 3 6 0 2 4 Play Rec Demo Song Sound On / Off
Metronome Tone
Press
Blinks alternately
in red and green
On / Off On / Off
Press Dark
On / Off On / Off
While holding down...
1 2 3 4 5 6 7 8
Press
Strings Piano 1 Piano 2 chord
Harpsi-
phone Organ
Vibra- Pipe
Piano 1
Electric
Piano 2
Electric
Tone
On / Off
Increases the volume Decreases the volume