RCA L40HD36 ES - Manual (Page 8)

8 Chapter 1 Connections and Setup
Attaching Your TV to the Table Stand
Your TV comes without the table stand attached so that you can choose to mount your TV either to its
table stand or to a wall (wall mount sold separately). If you want to mount your TV to the wall, don’t attach
the table stand. Follow the Mounting Your TV to the Wall instructions on page 12.
Fixed Table Stand Assembly for Models L26HD31 and L26HD31S
Step 3
1. Attach the table stand to the
TV cabinet. To do this, insert
the stand into the stand
connector support.
2. Align the screw holes. Insert
the three screws and tighten
with a screwdriver.
Step 1
Remove the TV bag and place it on a large,
flat surface such as a table or countertop.
Remove the TV from the carton and place
it face down on the TV bag. Be sure that
the TV is face down to avoid scratching
the screen. Follow the directions on the
following pages for assembling the stand
and attaching it to the TV.
Step 2
1. Remove the base and the
assembly parts from the box.
2. Remove the stand cap from the
TV cabinet, using a screwdriver
to remove the screw and pulling
out the cap.
Parts List
1 Stand Table
3 Size M4 ST-Screws
Size M3 ST-Screw
Stand cap
3 Size M4 ST-Screws
Stand Connector Support