RCA L40HD36 ES - Manual (Page 10)

10 Chapter 1 Connections and Setup
Swivel Table Stand Assembly for Models L32HD36 and L40HD36
Step 1
There are two options for the stand assembly:
Option 1: Your TV has been packed upside down in the carton (see Figure 1) so you can attach the TV
stand assembly before removing the TV from the box. This minimizes the risk of scratching the screen.
After removing the bag covering the TV, follow the directions on the following pages for assembling the
stand and attaching it to the TV.
Option 2: Remove the TV bag and place it on a large, flat surface such as a table or countertop. Remove
the TV from the carton and place it face down on the TV bag (see Figure 2). Be sure that the TV is face
down to avoid scratching the screen. Follow the directions on the following pages for assembling the
stand and attaching it to the TV.
Step 2
1. Remove the base and the assembly parts from the box.
2. Place the hinge on the stand base, aligning the slot on the hinge to the notch on the base.
3. Turn the stand upside down. Using a Phillips head screwdriver, attach the hinge to the stand base
using the four M5 screws provided.
Parts List
1 Stand Table Base
1 Hinge
4 Size M5 Screws 1 Size M8 Screw 1 Hinge Cover
Figure 2
Figure 1
Hinge Slot
notch
X4