Installer – Russound K2 User Manual
Page 37
37
INSTALLER
Programming Menu Instructions
A
.
MACRO ID – Select and enter the macro ID number.
v.
Select and enter Unassigned to clear the Power On command.
3.
POWER OFF CMD – Select and enter Yes to program a Power Off command or macro. Select and enter No to disable the
Power Off command or macro and skip to SAVE CHANGES (step 4).
a.
COMMAND TYPE – Select and enter a command type for the amp/receiver or other device you want to power manage.
Choose one of the following options:
i.
Select and enter Default to power manage only the amp/receiver using the same command type previously select-
ed for the device in BASIC SETUP.
A
.
KEY FUNCTION – Select and enter the Power Off function.
ii.
Select and enter Learned IR to power manage only the amp/receiver using a command stored in the amp/receiver
learned source location. (See Learn IR Procedure on page 25.)
A
.
KEY FUNCTION – Select and enter the Power Off function.
iii.
Select and enter a specific device to power manage only that device (e.g., CD, TV).
A
.
DEVICE CODE – Select and enter the IR device code number from the Reference section of this manual.
B
.
KEY FUNCTION – Select and enter the Power Off function.
iv.
Select and enter Macro to power manage multiple devices with a macro. (To build macros, see Macro Editor
Procedure on page 38.)
A
.
MACRO ID – Select and enter the macro ID number.
v.
Select and enter Unassigned to clear the Power Off command.
4.
SAVE CHANGES? – Select and enter Yes to save changes. Procedure returns to POWER MGT.