Russound K2 - Manual (Page 21)

21
11. Amp/Receiver Key Configuration (page 24) – By
default, the Source key selects sources and the Volume
keys adjust the output volume of the amp/receiver. You
may wish to reconfigure these keys to perform alter-
nate functions. The Amp/Receiver Key Configuration
procedure allows you to do this.
12. Source Command Key Configuration (page 30) –
This procedure allows you to assign additional or alter-
nate functions to the seven command keys on the
SaphIR K2 keypad for any source. Each command key
can be programmed to perform separate “press” and
“press and hold” functions.
13. Copy Configuration (page 40) – In a multiple-keypad
system, this procedure allows you to copy all the pro-
gramming from the first keypad to all the others in the
system. To do this, each keypad must have a unique
keypad ID (step 3).
INSTALLER
Programming Overview
1
2
3
1
2
3
Configurable Keys
FAVORITE PRESET KEYS – User-programmable keys for
favorite source programs (page 9)
SOURCE COMMAND KEYS – Installer-configurable through
Source Command Key Configuration (page 30)
AMP/RECEIVER COMMAND KEYS – Installer-configurable
through Amp/Receiver Key Configuration (page 24)