Radio Shack ET-685 - Manual (Page 23)

23
USING A HEADSET
You can make or answer calls with
hands-free convenience using an op-
tional headset (available at your local
RadioShack store) that has a
3 /
32
-inch
plug.
To connect the headset, pull open the
rubber cover marked
on the side of
the handset, then insert the 3 /
32
-inch plug
into the jack.
Notes:
• Connecting a headset disconnects
the handset’s earpiece and micro-
phone, but it does not affect the ET-
685’s speakerphone.
• VOL on the handset also controls
the connected headset’s volume.
• If you place the handset on the base
facedown to recharge it while the
headset is connected, be sure the
handset seats properly.
With a headset connected, you make or
answer calls as usual, using the keys on
the handset.
You can use a handset holder (available
from your local RadioShack store) to
hang the handset on your belt for great-
er convenience.
When you finish using the headset, dis-
connect it from the handset and close
the rubber cover to protect the jack.
43-685.fm Page 23 Thursday, July 8, 1999 7:50 AM