Radio Shack ET-685 - Manual (Page 14)

14
If the dial tone continues, that line
has pulse service.
4. Press LINE 2 , listen for the dial tone,
and repeat Step 3.
If you have tone service on both
lines, leave
PULSE-TONE set to
TONE .
If you have pulse service on either
line, set
PULSE-TONE to PULSE
(pulse). You can use tone services
on the line which supports them by
pressing
TONE/ before any other
keys.
ADJUSTING THE RINGER
The ET-685 lets you control its base and
handset ringer volume separately. You
can choose from a high or low ringer
setting for the base and the handset.
On the Handset
At any time except during a call, press
VOL to increase the ringer’s volume
or VOL to decrease its volume. The
display shows Ringer High or
Ringer Low .
On the Base
Set RING VOL on the back of the base to
HIGH , LO , or OFF for each line. At OFF
position, the base’s ringer does not
sound when a call is received, but the
handset (and any other phone connect-
ed to the same line) still rings.
SETTING AUTO TALK
Your phone is preset so you must press
LINE 1 or LINE 2 to answer a call. With
auto talk turned on, you can answer a
call by lifting the handset from the base
or by pressing any number key on the
base (or any key on the handset if the
handset is away from the base). You
can set the auto talk function on or off
for each line separately.
Note: You must set each line for auto
talk separately. When you turn on auto
talk for Line 1 only, you need to press
LINE 2 to answer a call on Line 2.
Follow these steps to turn auto talk on or
off.
VOL
RING VOL
43-685.fm Page 14 Thursday, July 8, 1999 7:50 AM