Radio Shack ET-685 - Manual (Page 20)

20
3. Once you have the second party on
the line, press CONFERENCE
( CONF/DELETE on the handset) to
bring in the first party. Both line indi-
cators on the base light green. The
handset display shows
(Confer-
ence) above Line 1 Line 2 if
you are making a conference call
using the handset, or
(Conf
Base) and Line 1 Line 2 if you
are using the speakerphone for con-
ferencing.
4. To end the conference call, press
one line button, then the other. If you
want to hang up one line and con-
tinue talking on the other, press the
line button you want to hang up.
If you want to talk on one line with-
out disconnecting the other, press
HOLD or HOLD/CANCEL , then the
button for the line you want to talk
on. To return to a 3-way conversa-
tion, press
CONFERENCE or CONF/
DELETE .
4-Way Conferencing
Follow these steps to use both lines and
the ET-685’s intercom function to set up
a four-way call (see “Using the Paging/
Intercom Features” on Page 22).
1. Make a 3-way conference call. (See
“3-Way Conferencing” on Page 19.)
2. Press INTCM/PAUSE on the handset
or INTERCOM on the base to page
the other keypad.
The two outside lines are automati-
cally put on hold, but the parties on
both lines can talk with each other.
3. To answer the page press INTCM/
PAUSE on the handset, or INTER-
COM on the base, then press CONF/
DELETE on the handset or CONFER-
ENCE on the base.
To end the conference call, press
LINE 1 and LINE 2 on one keypad,
then press LINE 2 on the other key-
pad.
If you want to hang up one line and
continue talking on the other, press
the line button that you want to hang
up.
Note: You can also make a conference
call using both the ET-685 and an exten-
sion phone. (See “Using the ET-685 with
Extension Phones” on Page 21.)
CONFERENCE
CONF/DELETE
INTERCOM
INTCM/PAUSE
43-685.fm Page 20 Thursday, July 8, 1999 7:50 AM