Runco CW-50MC - Manual (Page 16)

INPUT 1 CINEMAWALL
SCREEN SET UP OPTION PICTURE
CONTRAST : 0
BRIGHTNESS : 0
R. ADJUST
: 0
G. ADJUST : 0
B. ADJUST
: 0
H. SHARPEN : 0
V. SHARPEN : 0
FACTORY
INPUT1 CINEMAWALL
SCREEN SET UP OPTION PICTURE
POSITION : 0/ 0
FREQ. ADJ. : 0
PHASE ADJ. : 0
DISPLAY RESET
INPUT1 CINEMAWALL
SCREEN SET UP OPTION PICTURE
LANGUAGE : ENGLISH
ENERGY MODE : AUTO
PDP PROTECT : OFF
ORBITER : OFF
SIDEBAR ADJ. : OFF
AUTO SET UP MODE : OFF
INPUT PRIORITY
: OFF
AUDIO OUT LEVEL : FIXED
INPUT1 CINEMAWALL
SCREEN SET UP OPTION PICTURE
POWER MANAGEMENT : OFF
CLAMP POSITION : MIDDLE
SIGNAL
: XGA
MENUS for PC/HDTV-I D-SUB INPUT
15
OSD Menus for PC/HDTV-I D-Sub Input
1. PICTURE Tab
The Picture menu lists adjustments for computer
input to the plasma:
• CONTRAST is used to set the white level.
• BRIGHTNESS is used to set the black level.
• R., G., B. ADJUST can be adjusted to set color
balance.
• H. and V. SHARPEN option allows for adjustment
to improve the detail in the horizontal and vertical
direction independently.
• FACTORY set the back to the default settings.
2. SCREEN Tab
• POSITION option allows for position shift of the
image.
• FREQ. ADJ. adjusts the frequency to adjust for the
plasma.
• PHASE ADJ. adjusts the image of the picture to
match the screen.
• DISPLAY RESET defaults to the factory settings for
the current input Only.
3. SET UP Tab
• POWER MANAGEMENT shuts-down the plasma
panel when there is no source present.
• CLAMP POSITION normally, leave this setting at
[AUTO] (supported on Input1 only).
• SIGNAL specifies the output to the display.
4. OPTION Tab
• LANGUAGE allows selection of the desired language
and what language will be set in the memory.
• ENERGY MODE selects for an intensified picture
depending on ambient light conditions.
• PDP PROTECT switches the displayed image at
regular intervals.
• ORBITER prevents burn-in on static images.
• SIDEBAR ADJ. for masking in 4x3 or NTSC signals.
• AUTO SET UP MODE a is universal set up mode.
• INPUT PRIORITY allows priority selection of an
input.
• AUDIO OUT LEVEL is for audio output.
These menus will appear only when displayed for computer.