Radio Shack 4-Line Telephone System with Speakerphone and Caller ID - Manual (Page 15)

15 Telephone Operation
When set to OFF , the phone does not ring
when a call is received on any line.
Setting Always Ring
Your system is designed so your phone does
not ring when there is an incoming call on
one line if you are already talking on another
line, or when you have Auto Attendant turned
on.
However, you can set your station to Always
Ring (even in these circumstances).
Note: Even with Always Ring on, the station
does not ring when you are talking on the
speakerphone (outside line or intercom).
1. Press PROGRAM .
2. Select
3+21 3+21 3+21 3+21
.
3. Select
1(;7 1(;7 1(;7 1(;7
four times so
$/:$<65,1* $/:$<65,1* $/:$<65,1* $/:$<65,1*
appears.
4. Select
&+$1*( &+$1*( &+$1*( &+$1*(
to toggle between
21 21 21 21
and
2)) 2)) 2)) 2))
.
5. Press PROGRAM to exit.
SETTING THE HANDSET,
HEADSET, AND SPEAKER
VOLUME
You can individually set the volume levels for
the handset/headset and the speaker. When
you switch over, the volume level is automat-
ically changed to the set level.
Handset/Headset Volume
While using the handset or headset, select
9
VOLUME
8
to adjust the volume. One to
four bars appear to show the volume level. (1
bar is the lowest and 4 bars is the highest.)
The volume setting remains at this level until
you change it or a power failure occurs.
Speakerphone Volume
When using the speakerphone or when the
phone is not in use, select
9
VOLUME
8
to
set the speakerphone volume. One to eight
sets of bars appear to show the level. The
volume setting remains at this level until you
change it or a power failure occurs.
ˆ
Telephone Operation
Note: This owner's manual primarily explains
the operation using the handset. You can
also use a headset or the speakerphone.
USING A HEADSET
You can talk with hands-free convenience
using an optional headset (not supplied) that
has a modular type plug or
3 / 32 -inch (2.5 mm)
sub-mini plug. Contact your local
RadioShack store for a suitable headset.
If your headset
has a modular
plug, connect it
directly to the
modular jack
on the left side
of the base.
To connect the headset with a sub-mini plug,
first plug the supplied headset jack adapter
(sub-mini to modular converter) into the mod-
ular
jack, then plug the headset into the
headset jack adapter.
Headset Jack
Adapter
43-5709.fm Page 15 Wednesday, December 20, 2000 10:56 AM