Roland Digital Piano HP - Manual (Page 78)

78
Other Operations
When writing is completed, a screen like the following will appear.
9. Use the cursor buttons to select [OK] or [Cancel], and then
press the [O] button .
Operation Explanation
[OK]
The disc will be finalized to complete the music CD.
No more content can be written to a finalized CD-R
disc, even if there was some free space remaining on
the disc.
[Cancel] The disc will not be finalized.
When finalization begins, the screen will indicate “Executing...”
When finalization is completed or if you pressed the [×] button, you
will return to the “Menu” screen.
NOTE
Never turn off the power while the screen indicates “Executing...”
Writing Additional Songs to a CD
If a CD-R disc has not yet been finalized, you’ll be able to write
additional songs to it.
1. Insert an unfinalized CD-R disc into the CD drive .
2. Repeat steps 2–9 of “Writing Songs to a CD” (p . 77) as many
times as necessary .
Making the Disc Playable on Another CD
Player
A CD-R disc that has not been finalized is not a completed music CD,
and cannot be played back by another CD player.
To make the disc playable on other CD players, you must “finalize” the
disc.
1. Insert the unfinalized CD-R disc into the CD drive .
2. Press the [Application] button ➝ [CD Writing] ➝ [O] button
(p . 24) .
The “Select Songs” screen will appear.
3. Press the right cursor button to select “Finalize .”
Operation Explanation
[OK]
The disc will be finalized, thus completing the music
CD.
No more content can be written to a finalized CD-R
disc, even if there was some free space remaining on
the disc.
[Cancel] The disc will not be finalized.
4. Use the cursor buttons to select [OK], and then press the [O]
button .
Finalization will begin, and the screen will indicate “Executing...”
When finalization is completed or if you pressed the [×] button, you
will return to the “CD Writing” screen.
NOTE
Never turn off the power while the screen indicates “Executing...”