Roland Metaza M PX -60 - Manual (Page 63)

61
5 Troubleshooting
4 Click [Test print].
The test pattern is marked on the workpiece.
5 Grasp the base on both sides and pull back toward you
to remove.
5 10 10 15 15 20 20 5
5
5
10
15
20
10
15
20
6 Use the scale to read and note down locations where the
test pattern is not continuous or not visible. Note down
the values in all four directions (front, back, left, and
right).
7 Select [Correct slope] and enter the scale values you noted
into the driver.
Right Left
Back
Front