Installing the driver – Roland Metaza M PX -60 User Manual
Page 15
13
1 What to Do Before Marking
2
Appear the setup menu of the CD-ROM.
3
Press the [STANDBY] key to switch on the machine.
Installing the Driver
A driver must be installed in order to operate the machine.
Follow the steps below to install.
Windows XP
NOTICE
Keep the machine and the computer unconnected until you carry out this installation operation. Failure
to follow the correct procedure may make installation impossible.
☞
See "Installing the Driver" "What to Do If Installation Is Impossible."
1
Before you start installation and setup, make sure the USB
cable is not connected.
4
Connect the machine using a USB cable.
The [Found New Hardware Wizard] appears.
USB cable
Computer
Machine