Remove the protective media, Connecting the ac adapter and power cord – Roland Metaza M PX -60 User Manual
Page 12
10
1 What to Do Before Marking
Remove the Protective Media
The protective media shown below is attached to this machine when it is shipped from the factory. When you have finished installing the
machine, remove the protective media.
Connecting the AC Adapter and Power Cord
1
2
3
NOTICE
Do not connect the USB cable yet.
You connect the USB cable when you install and set up the software.
☞
See "1-3 Installing and Setting Up to the Software."
Remove the packing material and screw.
Connect in the order of the numbers shown in the figure.
Packing material
Use the Phillips screwdriver to
remove the screw.