Radio Shack TAD-764 - Manual (Page 19)

19
Follow these steps to record a memo.
1. Hold down PLAY/SKIP until the TAD
beeps.
2. Position yourself about 8 inches
away from the TAD and speak into
the microphone (located on the
front of the TAD).
3. The TAD automatically stops
recording after 60 seconds, or you
can press
ANSWER/STOP/DELETE
when you finish. The TAD beeps
once.
The memo is recorded along with the in-
coming messages. To hear the memo,
simply play back your messages.
CHANGING THE REMOTE
OPERATION SECURITY
CODE
The TAD’s remote operation security
code is preset to 764. You can operate
your TAD remotely with this code; how-
ever, we recommend that you set your
own code.
Notes:
• You have 8 seconds to set each
individual digit. Otherwise, you
must start over from Step 1.
• If AC power fails and the backup
battery becomes weak, the remote
operation security code automati-
cally resets to 764
.
1. Use a pointed object, such as a
straightened paper clip, to hold
down
CODE (located on the right
side of the TAD) until the TAD
beeps and announces the first digit
of the current security code.
2. Repeatedly press PLAY/SKIP or
OGM/REPEAT to set the first digit,
then press ANSWER/STOP/
DELETE . The TAD beeps and
announces the second digit.
3. Repeatedly press PLAY/SKIP or
OGM/REPEAT to set the second
digit, then press ANSWER/STOP/
DELETE . The TAD beeps and
announces the third digit.
4. Repeatedly press PLAY/SKIP or
OGM/REPEAT to set the third digit,
then press ANSWER/STOP/
DELETE. The TAD beeps once and
announces the complete remote
operation security code.
Illus. showing CODE switch.
43-764.fm Page 19 Friday, August 13, 1999 2:43 PM