Telephone, Setting the handset volume, Using redial – Radio Shack TAD-764 User Manual

Page 14: Using reset, Using tone services on a pulse line

TELEPHONE

SETTING THE HANDSET
VOLUME

The handset’s volume control lets you
adjust the sound you hear through the
handset.

To increase or decrease the volume,
roll the handset’s volume control up or
down.

USING REDIAL

You can quickly dial the last number di-
aled. When you hear a dial tone, press

REDIAL

Note: The redial memory holds up to 31
tone digits or 32 pulse digits, and lets
you redial long distance or local num-
bers.

USING RESET

To disconnect a call without hanging up
the phone, hold down

RESET

for about

1 second. When you release it and hear
a dial tone, dial again.

USING TONE SERVICES
ON A PULSE LINE

Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special tone services by following
these steps.

1. With

TONE/PULSE

set to

PULSE

dial the service’s main number.

2. When the service answers, set

TONE/PULSE

TONE

. Any addi-

tional numbers you dial are sent as
tone signals.

3. After you complete the call, set

TONE/PULSE

back to

PULSE

and

hang up the phone.

Illus. showing the
handset volume con-

Illus. showing the

REDIAL

button.

Illus. showing

RESET

button.

43-764.fm Page 14 Friday, August 13, 1999 2:43 PM