Roland HP-207 - Manual (Page 66)

64
Recording
Settings for Recording
4.
Press the [ ] button.
The following screen will appear.
fig.d-OverRec.eps
5.
Press the [ ] button once again.
The following screen will appear.
fig.d-OverRec2.eps
6.
Press the track button for the part you want to record, making the button
flash.
This allows you to record while listening to the selected song.
The [
] button will light, the [ ] button indicator will flash, and the HP207 will enter
recording standby mode.
If you decide not to record, press the [
] button once again.
How performance parts correspond with track buttons
Starting Recording
7.
Press the [ ] button.
After a two-measure count, recording will begin.
Even if you don’t press the [
] button, recording will begin when you play the keyboard. In
this case, a count won’t be sounded.
When recording begins, the [
] button and [ ] button will light.
During the count, the count measure is indicated in the lower right of the display as “-
2” then “-1.”
Track button Performance part
Track [Right] button Right-hand part
Track [Left] button Left-hand part
Track [Accomp] button Performance data other than the right-hand part and left-hand part
HP207_e.book 64 ページ ２００６年１２月２５日 月曜日 午前９時５２分