Ricoh GX200 VF KIT - Manual (Page 241)

239
7
A
p
p
e
ndi
c
e
s
Even though the flash
fired, the picture is dark. The distance to the subject
exceeds the flash range. Get closer to your subject and
shoot. Change the flash mode or
the ISO setting. P.51
P.146
The subject is dark. Correct the exposure. (Exposure
compensation also changes the
light intensity of the flash.) P.138
The light intensity of the flash is
not appropriate. Adjust the light intensity of the
flash. P.124
P.125
The flash cover is not fully raised. Do not press or cover the flash
cover. Also, return the LCD
viewfinder to the original angle,
and adjust to open the flash.
P.51
The image is too bright. The light intensity of the flash is
not appropriate. Adjust the light intensity of the
flash. Alternatively, move a little
away from the subject or
illuminate the subject with
another light source instead of
using the flash. P.124
P.125
Subject is overexposed.
(The [!AE] symbol appears.) Correct the exposure.
Decrease the exposure time.
Increase the aperture value
(close the aperture). Set [Auto
Aper. Shift] to [On]. P.138
P.89
P.87
P.149
The brightness of the picture
display is not appropriate. Adjust the brightness of the
picture display. P.188
The image is too dark. The shot was taken in a dark
place while set to flash off. Open the flash. Use the F (Flash)
button to cancel flash off. P.51
The subject is underexposed. Correct the exposure.
Increase the exposure time. P.138
P.89
The brightness of the picture
display is not appropriate. Adjust the brightness of the
picture display. P.188
The image lacks natural
color. The picture was shot in conditions
that made it difficult for auto white
balance to adjust the white
balance. Add a white object to the
composition or use a white
balance mode other than [AUTO]. P.140
The date or recording
information does not
appear on the screen. Display is set to no symbol
display. Press the DISP. button to change
the display. P.64
The brightness of the
picture display changes
during AF. You are using AF in a dark place
or when the auto focus range and
surrounding brightness are
different. This is normal. -
There is a vertical smear
on the image. This is a phenomenon that occurs
when a bright subject is shot. It is
called the smear phenomenon. This is normal. -
Problem Cause Solution Refer to