Ricoh GX200 VF KIT - Manual (Page 153)

151
S
hoot
ing/
P
laying
Back M
o
vi
es
2
2 Shooting/Playing Back Movies
You can shoot movies with sound.
You can set the image size to 640 × 480 or 320 × 240 pixels.
You can set the number of frames shot per second (frame rate) to
either 30 or 15.
Each movie you shoot is recorded as an AVI file.
1
Turn the mode dial to SCENE.
• The camera is ready to shoot and the
selected scene mode is displayed at
the top of the picture display.
2
Press the MENU/OK button.
• The scene mode selection screen
appears.
3
Press the !"#$ buttons to select 3 [Movie].
4
Press the MENU/OK button.
5
Press the shutter release
button to begin recording the
movie.
• Recording continues until you press
the shutter release button again.
6
Press the shutter release
button to finish recording the
movie.
Caution------------------------------------------------------------------------------------------
• While shooting movies, operation sounds may be recorded.
• The maximum recording time per shooting depends on the size of your SD memory
card. (GP.153) Even if you are within the maximum recording time, recording may
end depending on your card.
• The maximum recording time per shooting is 90 minutes or the equivalent of 4 GB.
• The camera shake correction function does not work in movie mode. If you set the
mode dial to 3 while the camera shake correction function is enabled, E
disappears from the picture display.
3 Shooting Movies
Shtr Btn:Start Shtr Btn:Start