Ricoh GX200 VF KIT - Manual (Page 148)

146
V
a
rio
u
s
S
hoo
ting
Fu
nc
tion
s
1
ISO sensitivity indicates how sensitive film is to light. A greater
value means higher sensitivity. High sensitivity is suitable for
shooting an object in a dark place or a fast-moving object while
minimizing blurring.
You can select from the following ISO settings:
Auto, Auto-Hi, ISO 64, ISO 100, ISO 200, ISO 400, ISO 800,
ISO 1600
When ISO setting is set to [Auto], the camera automatically changes
the sensitivity according to the distance, brightness, macro settings,
and quality/size. Usually, use the camera in the [Auto] mode.
When the ISO setting is set to [Auto-Hi] (auto high sensitivity), the
sensitivity is automatically set according to the shooting conditions,
but the upper limit of the sensitivity can be set higher than in [Auto].
When shooting a dark subject, the shutter speed set in [Auto-Hi] is
faster than in [Auto], which may reduce camera shake or blurring of
the subject. Set the maximum sensitivity for [Auto-Hi] in the setup
menu. (GP.194)
If you do not want to allow the camera to change the ISO sensitivity,
select an ISO setting other than [Auto] or [Auto-Hi].
1
In shooting mode, press the ADJ. lever.
2
Press the ADJ. lever left or right, or press the #$
buttons until the ISO setting menu appears.
3
Press the !" buttons to select the desired setting.
4
Press the ADJ. lever or the
MENU/OK button.
• The setting appears on the screen.
Changing the Sensitivity
(ISO Setting)
To change the setting, use the shooting menu or the ADJ. lever. This section explains easy
ways to change the setting with the ADJ. lever. (GP.72)
To use the shooting menu, see “Using the Menu”. (GP.103).