Ricoh GX200 VF KIT - Manual (Page 125)

123
V
a
rio
u
s
S
hoo
ting
Fu
nc
tion
s
1
You can automatically correct image distortion while shooting by
setting [Distortion Corr.] to [On].
1
Displaying the shooting menu.
• For the operating procedure, see P.103.
2
Press the " button to select [Distortion Corr.] and
press the $ button.
3
Press the !" buttons to select
[On].
4
Press the MENU/OK button.
• The symbol appears on the screen.
Caution------------------------------------------------------------------------------------------
• When [Pic Quality/Size] is set to RAW mode, you cannot use distortion correction for
DNG or JPEG files.
• You cannot use distortion correction when shooting S-Cont, M-Cont, or movies.
• When [Distortion Corr.] is set to [On], the angle of view will change.
• When distortion correction is not necessary due to the position of the zoom or other
factors, there will be no correction even when [Distortion Corr.] is set to [On]. However,
the distortion correction symbol will still appear when the image is played back even
if distortion correction was not carried out.
• The corrected image will not be displayed on the picture display even when [Distortion
Corr.] is set to [On].
Correcting Distorted Images While
Shooting (Distortion Corr.)